The new operating method of sesame oil, sesame oil hydraulic press machine motor power operation and use: you must read before (a) the instructions carefully before using the familiar performance characteristics and operation of sesame oil machine. (Ii) Prior boot, must conduct a comprehensive inspection, not loose fasteners, handle rotation flexibility, hand rotating pulley, each operating components should be normal, no abnormal noise. Then in the next 20 speed box filling machine oil. (C) loosen the lock nut, turn the adjustment screw, so pressing tight against the cone snail cake mouth of the cone, then the adjustment screw clockwise 2-3mm, then tighten the lock nut, ready to boot . (Iv) new electrical box door open sesame oil machine, the box turned on the power switch is closed, the machine power is turned on. Important new boot sesame machine: 1, before starting the first gearbox oil filling 10 kg. 2, use a dry cake with appropriate about 6-8% moisture, mix well bore after the feed hopper pressing the pressing bore polish, begin feeding, dry cake should be slow, not too fast, to be discharged properly, then appropriate to increase the amount of feed, cake repeated use its water gradually reduced, then the appropriate water. If the cake feed too fast, too dry pressing bore pressure will cause the sudden increase, causing blockage virgin bore, resulting in machine accident. Hydraulic oils Machine: http: //www.zzdfjx.com/ 3, pressing bore suitable temperature, there will be a good squeeze effect, and therefore should seek to raise the official press before pressing the chamber temperature. The methods available sizzling parison, can also be used to heat water in the dry cake mix, slow feed mills repeatedly until the temperature rises, until the outer surface of a hot date, then the normal press. Hydraulic press: http: //www.zzdfjx.com/ peanut oil press: http: //www.dongfeng668.com/ rapeseed oil press: http: //www.dongfeng668.com/ refined equipment: http://www.bafang818.com sesame oil machine: http: //www.bafang818.com